Floor Polishing & Toppings
STAINING, EPOXIES, MOISTURE MITIGATION, CAULKING AND DENSIFIERS
Solution Provider to the Chicagoland Flooring Industry Since 1981
For nearly 4 decades, Barrier Corp has been providing Solutions to our customers’ flooring problems. We bring you our expertise, our knowledge of the latest technology available and our professionalism, so that you can move forward in the best possible manner on your project.
There’s never a charge for us to come out to see your project and to share our expertise and our ideas with you!
Engineered Floors Whether you need your floor brought to a Floor Level Tolerance of Level, 1/8” per 10’, 1/4″ per 10’ or 1/2″ per 10’ Barrier Corp. can engineer your existing floor to your required Floor Level Tolerance. At no cost to you, we survey the existing floor area on a 5’x5’ or 10’x10’ grid pattern to determine what the existing is doing relative to a level floor. From there we “Engineer” the floor to your required Floor Level Tolerance and then “pin” the floor on each grid point with the thickness of infill needed to bring the existing substrate to the required Floor Level Tolerance. After-pour floor surveys are often required to show evidence that the installed products have indeed met the required Floor Level Tolerance.
Polishable Toppings If the existing substrate is not worthy of polishing as the finished floor, a thin topping can be installed over the existing substrate to provide a smooth and consistent look that can also be polished to look like a polished concrete floor. Epoxy / Resinous Floors Epoxy floor came be a thin coating of 1/16” or a 1/4″ troweled down urethane cement floor. Both types of Epoxy floors are used throughout the construction industry.